Duo Power Wart Treatment

Get rid of your warts in just 5 days!
With Excilor® DUO POWER, enjoy effective dual action thanks to the combination of cryotherapy and acid gel. Easy to use, this innovative treatment targets warts on the hands and feet and is suitable for adults and children from 4 years old.

Why choose Excilor® DUO POWER?
• Combines cryotherapy with an acid-gel formula
• Easy to use
• Exclusively for hands and feet
• Suitable for adults and children over 4 years old

Cryotherapy works directly by freezing the wart down to the root. The acidic gel causes the warts to peel off. Peeling is a natural process.

Directions for use:
For adults and children over 12 years old:
Day 1: Apply cryotherapy once a day.
Day 2, 3, 4, 5: Apply the acid gel twice a day.

For patients aged 4 to 12 years:
Day 1: Apply cryotherapy once a day.
Day 2, 3, 4, 5: Apply the acid gel once a day.
Treatment should be applied to children by an adult.

Caution : In order to maintain good personal hygiene, the devices must be used by only one user.

Precautions for use:
• Do not use in children under 4 years old.
• Do not apply on
- Warts located elsewhere than on the hands and feet.
- Healthy, irritated, bleeding or inflamed skin.
- Moles, brown spots, freckles, skin tags, seborrheic keratoses or molluscum contagiosum.
- Skin blisters or any suspicious lesions that could be skin cancer (melanoma).
- Warts larger than 5 mm (consult a doctor).

Consult a doctor before use if you:
• Are pregnant or breastfeeding.
• Are diabetic or suffer from circulatory or skin problems.
• Take blood thinners.
• Have any doubts about the nature of the injury.
• Experience irritation or redness after application.
• The wart does not disappear after 3 cycles of treatment.

Processing cycle:
DAY 1: START WITH THE CRYOTHERAPY PEN
STEP 1 - Activating the cryotherapy pen : Hold the pen on a stable surface. Press the side buttons 5 times. A frosty foam will appear.
STEP 2 - Application: Lightly press the metal foam for up to 20 seconds onto the wart to be treated. Hold the metal foam on plantar warts on thicker or calloused areas of skin,
such as the tip of the foot or the heel, for 40 seconds. A sensation of pain and/or itching and/or tingling appears.

DAY 2: START WITH THE ACID GEL PEN
You can use an ointment like petroleum jelly to protect the surrounding area before applying the gel.
STEP 3.1: Remove the cap: Turn the cap to align the arrows.
STEP 3.2: Pull the pen cap firmly.
STEP 3.3: Hold the pen vertically with the tip pointing down. When using for the first time, prime the pen and allow the gel to fill the tip. Up to 8 full clockwise turns may be required.
to disperse the first drop of gel (in order to build up enough pressure to break the airtight seal and release the gel into the tip).
STEP 3.4: Wait until you see the gel coming out of the tip. For each subsequent use: Slowly turn the dial at the top of the pen clockwise. Leave 3 to 5 seconds between each click.
STEP 3.5: Gently apply one drop (one click) of gel strictly on the wart.
STEP 3.6 - Protection: In case of accidental contact with healthy skin, wash immediately with soap and water.
STEP 3.7: Let the gel dry for 10 to 15 minutes before applying
socks, shoes or gloves.
STEP 3.8: Gently wipe the tip with a tissue to remove any excess gel. Recap the pen firmly and align the arrows. A small amount of gel may remain. Caution is advised when closing and opening.

DAYS 3, 4, 5: Repeat STEP 3
STEP 4: If the wart persists after 7 days, repeat the treatment (up to 3 cycles maximum).

After treatment:
• Avoid sun exposure until the skin is completely regenerated (4 to 6 weeks).
• Do not touch or scratch the treated area.
• Keep the area clean (showering and bathing permitted).
• Protect the blister with a bandage if necessary, do not pierce it.

Ingredients :
Cryotherapy Pen (Cryo Activ™/Freezing Agent): 1,1-Difluoroethane, Propane, Isopentane.

Acid gel pen (TCA Activ™/caustic gel): water, trichloroacetic acid, carbopol.

Collezione: Flammable products

Visualizzazione 24 di 24 prodotti

Filtra e ordina

Let customers speak for us